When selecting youth baseball bats it is important to consider the bats length, weight, barrel width, and league requirements. While wood bats are available, most people select aluminum or cutting-edge alloy bats for youth baseball. A general rule is to select the lightest bat for its length in order to maximize swing power. Lighter bats are more expensive, while heavier bats are usually thicker and made from a cheaper-grade aluminum. Longer youth baseball bats arm the player with more plate coverage, but they also weigh more. Shorter bats are faster but may force the batter to crowd the plate in order to reach the outside edge of the strike zone.

Also consider the size of the barrel. A larger barrel wields more power and has a bigger sweet spot, yet the larger barrel requires more mass, and so it is heavier. Often selecting a bat is an imperfect science because you cant really hit a ball in a store, or even really swing the bat for that matter. You might even try going out to a local baseball practice or batting cage. Then you can try many different bats, actually making contact with the ball, and get a much more accurate picture of what bat works for your son or daughter.

Little League baseball bats should not be more than 33 inches long or more than 2 1/4 inches in diameter at the barrel. Little League baseball bats should be taped around the handle and up 10 inches. Bats are measured in inches for length and ounces for weight. Minus numbers are used to show a bats measurements. For example, if a bat is 33 inches long and has a (-10) rating, that means the bat weighs 23 ounces. So the higher the negative number than the lighter the bat is for its length.